Product ID:STAFOAM AA402,COMPONENT T(2 PART KIT:A)
MSDS Date:01/01/1987
FSC:9330
NIIN:01-033-9756
Kit Part:Y
MSDS Number: BGGGK

EXPANDED RUBBER & PLASTIC CORP

14000 SOUTH WESTERN AVE.
GARDENA, CA 90249
US

Emergency Phone: 213-324-6692 /213-321-4260

Info Phone: SAME

Cage: 25598

EXPANDED RUBBER AND PLASTIC CORP

GARDENA, CA 90249-3008 US

Telephone: 310-321-4260

Cage: 25598

TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: <80%.

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

POLYETHER POLYOL

Fraction By Weight: >10%.

TRICHLOROFLUOROMETHANE (CFC-11) (SARA III)

CAS: 75-69-4

RTECS: PB6125000

Fraction By Weight: > 1%.

OSHA PEL 1000 PPM

ACGIH TLV: C, 1000 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BENZOYL CHLORIDE (SARA III)

CAS: 98-88-4

RTECS: DM6600000

Fraction By Weight: 0.1%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: VAPORS INHALATION MAY CAUSE
SEVERE RESPIRATORY TRACT IRRITATION. LIQUID CONTACT CAUSES SERIOUS
SKIN & EYE BURNS; CHRONIC: PROLONGED EXPOSURE MAY CAUSE PULMONARY
EDEMA, CHRONIC LUNG IMPAIRMENT.
Explanation of Carcinogenicity:A NTP PROGRAM SHOWED "TDI" TO BE
CARCINOGENIC WHEN GIVEN TO RATS IN MAXIM. TOLERATED DOSES; INHAL
STUDY(2 YR): NOT CARCN
Effects of Overexposure:INHAL: DIFFICULT & LABORED BREATHING,
ASTHMA-LIKE ATTACKS IN SENSITIVE PERSONS; SKIN/EYES: SEVERE
IRRITATION, EYE DAMAGE OR TDI SENSITIZATION.
Medical Cond Aggravated by Exposure:RESPIRATORY, BRONCHIAL CONDITIONS.
SKIN SENSITIVITY.

First Aid:INHAL: MOVE INDIVIDUAL TO FRESH AIR. GIVE CPR/O*2 AS
SITUATION DICTATES.-GET MED. ATTN.; SKIN: WASH W/PLENTY OF SOAP &
WATER,REMOVE CONTAMINATED CLOTHING.; EYES: FLUSH W/WATER FOR 15
MIN.-GET MED. ATT N.; INGEST: GIVE PLENTY OF WATER- DO NOT INDUCE
VOMITING.

Flash Point Method:PMCC
Flash Point:260F/126.7C
Lower Limits:0.9
Upper Limits:9.5
Extinguishing Media:WATER FOG, CO*2, FOAM
Fire Fighting Procedures:FIRE FIGHTERS MUST WEAR "SCBA" & TURNOUT GEAR.
OXIDES OF CARBON & NITROGEN; TDI VAPORS & HCN, HCL, HF WILL BE
GENERATED.
Unusual Fire/Explosion Hazard:WATER CONTAMINATED MATERIAL WILL GENERATE
CO*2 WHICH MAY CAUSE EXPLOSIVE RUPTURE OF CLOSED CONTAINERS WHEN
EXPOSED TO FIRE CONDITIONS. SAME EFFECT ON HEAT FREON

Spill Release Procedures:CLEAN UP CREW MUST WEAR FULL PROTECTIVE
EQUIPMENT. ABSORB MATERIAL W/ SAWDUST OR SWEEPING COMPOUND.
DECONTAMINATE W/ MIXTURE OF 90% WATER & 8% CONC. AMMONIA & 2%
DETERGENT. SHOVEL INTO OPEN TOP DRUMS & REMOVE TO WELL VENTILATED
AREA.
Neutralizing Agent:90% WATER + 8% CONC. AMMONIA + 2% DETERGENT.

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS IN
DRY,COOL PLACES AT TEMPERATURES BETWEEN 65-75F/18.3-23.8C.
Other Precautions:PRODUCT REACTS W/WATER & OTHER SUBSTANCES GENERATING
CO*2 GAS CAUSING SEALED CONTAINERS TO EXPAND & POSSIBLE RUPTURE. DO
NOT RESEAL CONTAINERS IF CONTAMINATION IS SUSPECTED. BREATHING
VAPOR OF HOT MAT ERIAL CAN BE EXTREMELY DANGEROUS.

Respiratory Protection:TO 0.05 PPM: ANY SUPPLIED-AIR
RESPIRATOR/SELF-CONTAINED BRTHNG APPART; TO 0.125 PPM: ANY
SUPPLIED-AIR RESPIRATOR OPERATED IN A CONTINUOUS FLOW MODE; TO 1
PPM: ANY SELF-CONTND BRTHNG APPART. W/FULL FAC EPIECE/ANY SUPPL-AIR
RESPIR. W/FULL FCPC
Ventilation:LOCAL & GEN. MECH. VENTIL. REQUIRED. TDI VAPORS ARE HEAVIER
THAN AIR-DESIGN EXHAUST SYSTEM ACCORDINGLY.
Protective Gloves:CHEMICAL RESISTANT RUBBER OR PLASTICS
Eye Protection:FITTED GOGGLES OR FACE SHIELD & S.GLASS
Other Protective Equipment:COVERALLS, BOOTS, RUBBER APRONS
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORKING AREAS.
KEEP CLOTHING CLEAN & EQUIPMENT CLEAN AT ALL TIMES.
Supplemental Safety and Health
KEY1:T2.

HCC:T2
Boiling Pt:B.P. Text:75F/23.9C
Vapor Density:6.0
Spec Gravity:1.2
Solubility in Water:REACTS W/GIVES CO*2
Appearance and Odor:LIGHT YELLOW,MEDIUM VISCOSITY LIQUID; STRONG
PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
BASIC COMPOUNDS SUCH AS CAUSTIC SODA, TERTIARY AMINES, WATER.
Stability Condition to Avoid:TEMPERATURES >167F/75C FOR EXTENDED
PERIODS OF TIME.
Hazardous Decomposition Products:ISOCYANATE VAPORS, OXIDES OF CARBON &
NITROGEN, HCN, HCL, HF.
Conditions to Avoid Polymerization:WATER & OTHER PRODUCTS THAT REACT
W/ISOCYANATES.

Waste Disposal Methods:DISPOSAL OF WASTE MUST BE DONE IAW FEDERAL,
STATE & LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.